Projector

flat

=**When using the projector, how do I switch among DVD/TV/Computer?**= Most of it can be done with the projector remote as long as each medium you're using is up and running. For example, the DVD player is on and DVD is loaded, the amp is turned on and volume is turned up, and projector and computer are connected. Then, use the Epson projector remote buttons EasyMP and Video to toggle between the two. You'll of course need to also use the LG DVD player remote to Play the DVD or Pause/Stop the DVD. Once the DVD is stopped and you're still in video mode, it will default to cable TV. So these are the steps to get up and running: 1. Turn on the projector and launch EMP on the computer. Auto connect or do so manually by typing in the DHCP IP address (the IP address is at the bottom of the projected image). Your computer screen should then be projected. 2. To watch TV use the Epson remote and press the Video button. (turn on the Amp for volume--DVD dial) 3. To watch a DVD: turn on the DVD player / Load DVD / on the projected screen you'll see the DVD loading in the top left-hand corner / the DVD program menu will appear / Hit Play 4. To switch back to Computer mode while watching a DVD: hit Pause on the LG DVD remote and then Easy MP on the Epson projector remote 5. To switch back to the DVD: hit the Video button on the Epson projector remote and Play on the LG remote.

=How do I configure my Projector to display my MacBook screen wirelessly?=
 * 1) Make sure your **Wireless Connection** is operating (you'll see dark bars in the Airport Icon [[image:Picture_11.png]])
 * 2) Turn on your **Projector**.
 * 3) Go to the **EMP NS Connection** **Icon**[[image:Picture_13.png width="48" height="49"]] in the **Dock** or find it in the **Applications Folder** of your **Macintosh HD**.
 * 4) Typically the program will search for a projector, but it won't find one. Click OK if this occurs.
 * 5) On your **Projector Remote**, click the **EasyMP** button. (see highlighted example). [[image:remote_copy.jpg width="118" height="261" align="right"]]
 * 6) You will see a number in the bottom left-hand corner of the screen (it may say it's searching for an IP Address and if this is the case, please wait).
 * 7) Once you see the **IP number**, go to **Manual Search** on your **EMP NS Connection** Screen.
 * 8) Type this address in exactly as you see it, and click OK.
 * 9) The Projector will be added to the list and it will run a search for it.
 * 10) Once it finds it, click the checkbox next to the Projector Name and click the **Save in Profile** button.
 * 11) Name this projector your name or classroom.
 * 12) In the future, after the program has attempted to find your projector, you can simple go to the Profile Tab and pull down the saved profile you created. It will run a search for the projector and once it finds it, you can click **Connect**.
 * 13) If you do not see your computer screen displayed, click the **Computer** button on your remote.